🔍
PoE Tester Pro
PoE Tester Pro
PoE Tester Pro
PoE Tester Pro
PoE Tester Pro
PoE Tester Pro
  1. PoE Tester Pro
  2. PoE Tester Pro
  3. PoE Tester Pro
  4. PoE Tester Pro
  5. PoE Tester Pro
  6. PoE Tester Pro

PoE Tester Pro

SKU POE2000
614395002039
No reviews yet | Write A Review

AED353.00

The Triplett POE2000 helps to speed up the installation and troubleshooting of PoE system devices. It can detect PSE-type/class, power source, polarity, voltage, current, power, and whether it is End Span (1/2, 3/6), Midspan (4/5, 7/8), or across all 4 pairs. If you are a VoIP phone and IP camera installer, you will know if there is power and a data pair available for your equipment. There is a test mode that can determine if a standard PoE (36 to 60V) or non-standard (11 to 60V) passive PoE is being used. For inline power level monitoring the display alternates between Voltage, Current and Power and incorporates a step button for selecting specific data to display. No batteries required, uses system power when connected to a device.

Weight 0.25 kg
Dimensions 2.25 × 1.75 × 6 cm
  • 4 LEDs indicate IEEE802.3af or 802.3at/bt standard
  • Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
  • Determines standard PoE or non-standard passive PoE
  • 2 Yellow LEDs indicate reversed polarity for power type
  • Display alternates between Voltage, Current, and Power with a step button for selecting specific data to displa

Product Group:  Security Camera Test Solutions

Product Type: Security Camera

Harmonization Code: 9031.80.8060

ECCN: EAR99

Packaging: Box

Weight lbs to kg: 0.25

Length in: 2.25

Width in: 1.75

Height in: 6

POE2000
Connector Interface 2X RJ45 (PSE & PD Test Jacks)
Voltage Range Standard PoE: 36 to 60V; Non-Standard: 11 to 60V
Max Current (based on 50V) 990mA/50W per mode; Total 2A/100W
Function Selection Mode
 T Mode: for detecting PSE status
N Mode: for determining non-standard PoE + inline testing
I Mode: for testing & monitoring real-time power status
Display
 4 LEDs indicate IEEE802.3af or 802.3at/bt standard
Dual 7-digit LEDs indicate power source either end (A) Span (1/2, 3/6) or Mid (B) span (4/5, 7/8) or both for bt
2 Yellow LEDs indicate reversed polarity for power type
Display alternates between Voltage, Current and Power
Step Button For selecting specific data to display
Power Uses system power when connected to a device
Dimensions/Weight 3.9 x 1.4 x 1 ” (99 x 36 x 26mm)/1.6oz (45.4g)
Data SheetUser Manual
Category: POE TESTERS & EQUIPMENT

Related products